When using an automatic die-cutting machine, it is important to pay attention to the following machine adjustment methods. The following automatic die-cutting machine operation process can ensure the operational efficiency and extend the service life of the automatic die-cutting machine.

Automatic die-cutting machine adjustment method
In the case of large-scale and complex logo design film cutting, automatic die-cutting machines require technical and professional manufacturers to produce film cutting plates to ensure the accuracy of film cutting<
The sharpness of the cutting edge must be maintained, records must be established, and the use status of each cutting film plate must be recorded to facilitate timely disassembly and replacement of the cutting head<
The quality of the cutting film should be regularly checked, especially for automatic labeling. It can prevent a large number of product quality issues. The main inspection method is to use a data signal pen to wipe the backing paper and check the penetration of cutting marks on the backing paper<
The raw materials for film cutting and printing are plastic films that do not need to be used frequently. The cutting edges have been worn out for a long time, and it is no longer suitable to cut plastic films again< br> Be alert to automatic die-cutting machines used for welding on automatic die-cutting bodies. Generally, it is relatively cheap, but when buying, it is important to pay attention to the warranty service. Generally speaking, due to the wide range of sources, second-hand equipment that is transferred is generally not the manufacturer of the production equipment. At this time, the warranty of the machine becomes particularly important. Warranty issue: Precautions for purchasing a second-hand automatic die-cutting machine replacement book< br>
Actual operation process of automatic die-cutting machine
The actual operator must have a Chinese qualification certificate and review the previous shift's work handover form to have a detailed understanding of the equipment's operation status<
Check that there is no dirt on the equipment table, turn on the main switch power of the automatic die-cutting machine control cabinet, and simply know if the automatic die-cutting machine display light is on<
The staff should check whether the size specifications of the cutting plate and mold shell are consistent according to the manufacturing procedures<
During each die-cutting process, the product identification card must be carefully checked and filled out before packaging the goods< br> Then report in detail to the responsible person the entire process of film cutting in manufacturing and the application status of the equipment, using OEE reports<
The user shall establish a safety technical file for the automatic die-cutting machine and record the safety production situation. The wires exposed to the automatic die-cutting machine must be protected with sleeves, and wires of different voltages must use their own sleeves. The metal casing of the electric control box of the automatic die-cutting machine motor must have good grounding protection. The automatic die-cutting machine equipment should be intact, technical data should be complete, and special tools should be complete and intact< br>
Automatic die-cutting machine adjustment method
When the gap position of the film cutting roller in the automatic die-cutting machine is different from the commercial position, the reasons are as follows:
It is very likely that there is a deviation in the cutting disc of the automatic die-cutting machine itself, which results in differences between the film cutting and stamping parts of the automatic die-cutting machine and the packaging and printing products. Therefore, it is necessary to obtain the film cutting disc immediately<
Another issue is the automatic die-cutting machine for film cutting and packaging printing, which is not caused by aligning the two ends. The processing method is to calibrate the film cutting marks according to the conveying position or precise positioning regulations of the printing paper before printing, so that the film cutting marks are aligned with the packaging printing grid< br> In actual die-cutting production, the assembly and adjustment of automatic die-cutting machine molds is particularly important. The assembly and debugging of molds is also known as "knife installation". The correctness of the tool installation position directly affects the production efficiency and product quality of die cutting production, and may even cause safety accidents. If the machine parts are slightly damaged, personal accidents can occur. All mold adjustment work is particularly important!